Sanitary Centrifugal pumps
Application:
BAW Centrifugal pump is an efficient and economical pump both due to meeting the requirements of the health and gentle handling of product and to its chemical stability. It is applies to most fields of the sanitary industry.
Design Standards:
The basic components of BAW centrifugal pump included:a standard motor,spindle ,expansion couplings,converters,backboard,impeller,pump case and shaft seal.
BAW centrifugal pumps for sanitary applications have stainless steel case shields for the protection of the Mazda,and each pump unit equiped with a complete set of four stiainless steel support can be adjustable feet.
NUOMENG's centrigugal pumps' special design of amplifying outlet and advanced impeller allows smooth flow and meets the minimum NPSH requirements(minimum requirements can be reduced NPSH cavitation phenomena occur).This product can be cleaned by CIP or by hand.It also has a cleanable seal.
Technical Data:
| Power |
2.2kw Flow: 10T/H Lift: 24M |
| Max inlet pressure |
500kpa(5bar) |
| Temperature range |
-10-+140degree |
| Noise level |
60-85Db(A) |
| Pressure |
Max500kpa(5Bar): Water consumption: 0.25~0.5L/H |
| Teel PART Material |
304/316L |
| Seal Material |
EPDM |
| |
|
| |
|
| |
|
Motor: With a basic flange mater, according to IEC metric standard. When the Voltage frequency 50/60Hz, two electrodes is 3000/3600rpm
Frequency, Voltage and Power(3~phase Electricity)
50HZ, 220-240V/380-420V<4KW(Recommended)
60HZ, 250-280V/440-480VY<6KW
| Type |
|
|
|
|
| NMLX-3-16 |
3 |
16 |
0.75 |
1.5"/1.5" |
| NMLX-5-15 |
5 |
15 |
1.1 |
1.5"/1.5" |
| NMLX-6-22 |
6 |
22 |
1.5 |
1.5"/1.5" |
| NMLX-10-20 |
10 |
20 |
1.5 |
1.5"/1.5" |
| NMLX-15-18 |
15 |
18 |
2.2 |
1.5"/1.5" |
| NMLX-5-24 |
5 |
24 |
1.5 |
2"/1.5" |
| NMLX-10-23 |
10 |
23 |
2.2 |
2"/1.5" |
| NMLX-25-20 |
25 |
20 |
3 |
2"/1.5" |
| NMLX-5-30 |
5 |
30 |
2.2 |
2"/1.5" |
| NMLX-10-25 |
10 |
25 |
2.2 |
2"/1.5" |
| NMLX-10-32 |
10 |
32 |
2.2 |
2.2"/1.5" |
| NMLX-20-25 |
20 |
25 |
4 |
2"/2" |
| NMLX-20-25 |
20 |
25 |
4 |
2"/2" |
| NMLX-30-25 |
30 |
25 |
5.5 |
2.5"/2" |
| NMLX20-35 |
20 |
35 |
5.5 |
2"/2" |
| NMLX-30-32 |
30 |
32 |
5.5 |
2.5"/2" |
| NMLX-40-30 |
40 |
30 |
7.5 |
2.5"/2" |
| NMLX-5-50 |
5 |
50 |
3 |
2"/1.5" |
| NMLX-10-40 |
10 |
40 |
3 |
2"/1.5" |
| NMLX-10-50 |
10 |
50 |
4 |
2"/1.5" |
| NMLX-15-45 |
15 |
45 |
5.5 |
2"/1.5" |
| NMLX-30-36 |
30 |
36 |
7.5 |
2.5"/2" |
| NMLX-10-36 |
10 |
36 |
7.5 |
2.5"/1.5" |
| NMLX-10-60 |
10 |
60 |
11 |
2.5"/1.5" |
| NMLX-20-75 |
20 |
75 |
11 |
2.5"/1.5" |
| NMLX-25-60 |
25 |
60 |
11 |
2.5"/1.5" |
| NMLX30-60 |
30 |
60 |
15 |
2.5"/2" |
| NMLX-30-65 |
30 |
65 |
15 |
2.5"/2" |
| NMLX-20-73 |
20 |
73 |
15 |
2.5"/2" |
DELIVERY:
The delivery depends on different machines with different configurations. Please contact us to confirm it is in stock or not.
PAYMENT:
We prefer to do 100% T/T (30% T/T in advance, 70% T/T before shipment)
FAQ:
I. Are you factory?
Yes,we are factory and we're specilized in manufacturing valve for 15 years.
II. Which countries do you expot to?
We're exporting to about 40 countries around the world. For Europe and America Area ,it takes about 30%,Middle East area:40%, Africa area:30%.
III. If you can do valve in our brand?
Yes,we can do your brand,but need you to provide the certificate of authrization for us.
IV. Where is your factory ?
Our factoury is located in Wenzhou city. If you have time ,welcome to visit us!
V.Which delivery port do you usually use?
There are three port we usually use:Shanghai pot,ningbo port,Wuhu port.
VI,What kinds of certificates do you have?
We have ISO9001:2000 quality certificates,3A certificatesand ISO14001:2014
Packing:
Audited Supplier 
){kind=link}
){kind=link}