Application:
The series of this valve are sanitary pneumatic or manual butterfly valves,which are widely used in stainless steel pipeline system to control and regulate medium flow.
Work Principle:
This kind of valve can handled by manual an electric actuator,and also can be handled by a pneumatic actuator.
Electric actuator or pneumatic actuator covert the axial movement of piston to be 90° rotation of valve shaft.So that the valve can be open or close to achieve the requirement of control and open/close for the pipeline system.They have three type of actuator:normally open(NO),normally closed(NC),air/air(A/A).
Muti-position handle regulate the valve by 15° in its open or close 12 seats achiening control of medium flow purpose:
Pulling handle regulates the valve through four multi-function positioning ,in its open or close four position,also achieves control of medium flow purpose.
Standard Design:
Various standards of valves can be provided to clients:DIN,3A,SMS,ISO/IDF,BS/RJT,ASME/BPE etc.
The parts of valve usually include:two pieces body of valve,disc,gasket of valve disc,gasket,and the entire valve is assemble together with bolts and nuts:3 piece butterfly valve also include two flanges and two gasket of flange.
The series of NUOMENG butterfly valve:welded,clamp,male,weld/male,union/male,three pieces ect.
The series of actuator:1.stainless steel pneumatic actuators specification:Φ85,Φ108 and Φ133. 2.Aluminum pneumatic actuators,specification:ZT050D,ZT063D,ZT075D,ZT088D,ZT100D,ZT115D; 3.Electric actuators,specification:HL-05,HL-10,HL-20(Detail specification in page 192-196).
Actuator is fixed in the valve(by a bracket and bolts).
The specification of NUOMENG manual handle as follows:
1.Pulling handle,we can supply two kinds of specification(you can found the details on page 191)
2.Multi-position stainless steel handle can be used on the specification as follows:
DN10-DN100/3A 3/4"-4"/SMS19-102/DS1"-4"/ISO/IDF Φ19-Φ108
3.Multi-position plastic handle can be used on the specification are the same as the stainless steel multi-position handle,
The handle is fixed by a bolt.
Technical data:
|
Product name |
SS304/316L Sanitary Welded Butterfly Valve With pulling Handle |
|
Application: .It is widely used in the systems for food,beverage.dairy,brewing,phamaceuatical,bio-pharmaceuatical and chemical industries. |
| · Body Materials: |
AIS1-304 or AISl-316L |
| · Gasket Material |
Silicon,EPDM,VITON,NBR |
| · Valve seat and gasket complywith FDA21CFR177 2600 |
| · Standard Avaliable: |
DIN,3A,SMS,ISO /IDF,BS /RJT,and ASME /BPE. |
| · Available in sizes from DN10-DN250 1/2''-10" |
| · Endconnection: |
Butt-weld,Clamp,Male.Nut,Liner or Flange or other supon request. |
| · Handle: |
plastic pulling handle (4 positions) or plastic/stainless steel multi position handle (12 positions) |
| · Actuator. |
pneumatic stainless steel actuator (vertical type).pneumatic aluminum actuator (horizontal type).electric actuator. |
| Technical specification |
| ·Pressure : |
1-10bar |
| · Temperature range: |
EPDM(-20~120°),VMQ(-20~+150°)FPM(-20~+180°) |
| · Surface treatment: |
Ra16~32uin(0.4~0.8um) |
DELIVERY:
Usually within 15days after receiving T/T down payment
PAYMENT:
We prefer to do T/T or LC.
FAQ:
I. Are you factory?
Yes,we are factory and we're specilized in manufacturing Valve and fittings for 15 years.
II. Which countries do you expot to?
We're exporting to about 40 countries around the world. For Europe and America Area ,it takes about 30%,Middle East area:40%, Africa area:30%.
III. If you can do valve in our brand?
Yes,we can do your brand,but need you to provide the certificate of authrization for us.
IV. Where is your factory ?
Our factoury is located in Wenzhou city. If you have time ,welcome to visit us!
V.Which delivery port do you usually use?
There are three port we usually use:Shanghai pot,Ningbo port.
VI,What kinds of certificates do you have?
We have ISO9001:2000 quality certificates,3A certificatesand ISO14001:2014, FDA
){kind=link}