Multiport diaphragm valve
Application:
According to customers' requirements, after learning about the customer on-site technical requirements,installation location and the flowing direction relationship among the various flowing channels,a piece of forged stainless steel is made into a multi-channel combined valve through the CNC maching center to implement online CIP and SIP functions.Because the design of this valve is unique,the residual between valve seats should be as little as possible,it requires the valve designer has a good understaning of the process and rich experience.Nuomeng Technology Corporation has professional design teams and software,which is able to quickly complete the 3D design,timely communicate with customers and confirm drawings.
| Body; |
AISI-316L |
| Membrane: |
EPDM+PTFE or EPDM |
The seal materials comply with FDA 177.2600 standard. Using proprietary technology, the diaphragm uses a combination of EPDM and PTFE, which is secured using SS bolts. The seal part where contact with the medium is of PTFE material, it has good cold resistance -13ºF(-25ºC), excellent heat-resistance 482ºF( +250ºC ) tolerance to most chemicals, and excellent abrasion resistance to medium flow.
| Standards: |
DIN, SMS, ISO, IDF, BS/RJT, ASME/BPE |
| End Connections: |
butt-welded, sanitary clamp, or others upon request |
| Body Type: |
T-type tee, U type tee, Mini type, Tank bottom type, etc. |
| Operation |
Manual or Pneumatic |
| Manual Option: |
Plastic or Stainless Steel Hand Wheel |
| Max Working Pressure: |
147psi (10bar) |
| Temperature Range: |
14~248ºF(-10~120ºC), EPDM |
| Inside Polishing: |
Pa 16-32 µ, in(0.4-0.8μm) |
| Available for CIP/SIP |
Packing:
Audited Supplier 
){kind=link}