Product Name: Sanitary horizontal pneumatic cross ball valve
Friendly reminder it's peak season currently. After payment, please can you provide the bank slip. The production will be arranged in advance.
Processed by state-of-the-art equipment in workshops. Best service is provided.
Inspected by a professional quality control team. Best quality is guaranteed.
With experiences accumulated through years and deep talks conducted between end users of fluid pipelines, we are able to continuously optimize the design and structure of ball valves
Blow-out proof stem adds safety and reliability to the full extent.
Thickened stem packing; V-shaped stacking design; Adjustable self-compensating gland.
Multiple control modes. Easy to realize remote or automatic control.
All sealing materials contacting with fluids are reinforced PTFE, in accordance with FDA177.1550 and GMP standards.
Support CIP (Clean-In-Place) and SIP (Sterilization-In-Place).
Valve bodies and caps are delicately cast by CF8, CF3M or 2205 materials; or forged by F316L. In case of specific working conditions, special materials, such as HC/Ti, will also be applied.
Standard PTFE seals are compatible with most operating conditions (-10ºC~+110ºC).
TFM600 seal is also available as an option, which is also compatible with many operating conditions (-60ºC~+150ºC).
POB seal is also available for high-temperature operating conditions (-10ºC~+210ºC).
In the range of its specified working pressures and temperatures, the valve is perfectly sealed. When pressure increases, the sealing performance can automatically be improved. Due to a small friction between seals and valve body, the stem torque is also relatively small.
Our sanitary ball valves are fully sealed in two directions, which comes as standard. The sealing structure can fill the clearance in the cavity, ensuring no media is detained in the cavity, and the cavity and tube can thus be cleaned.
But for front-end or rear-end discharge use, it is more economic and practical to apply half sealed valves.
3-PCS ball valves are flexible to set up and easy to be maintained online or offline, which significantly minimizes the production downtime due to valve or pipeline maintenance. During maintenance, it is not necessary to disassemble the actuator or joint component from the valve. When the maintenance is completed, it is also convenient to re-amount the valve or actuator components; no calibration is needed.
Working principle:
This kind of valve can be operated through actuator(electric pneumatic)
Actuator or manually with the hand is to revolve the axial movement unto 90degree: So than it the valve can open or close. The actuator have three type.
Multi-position handle can use to 15 degree adjustment of valve there is 12seat to lock open or close, In that way, the valve can control the flow.
Pulling handle can use to the 4 multi-function to lock open or close. In that way, the valve can control the flow.
Material: Steel parts: 304 stainless steel, stainless steel 316L
Seal: VMQ, FPM, EPDM, PTFE
Standard design: DIN, 3A, SMS, ISO/IDF, RS/RJT, ASME/BPE, ETC.
The parts of valve usually include: Valve body which divided into two parts, the ball with through cavity, valve stem and control sets(handle/actuator)etc.
Connection: Weld, clap, weld/clamp, etc.
Packing:
){kind=link}